Event LED screen

An event LED screen must rig fast, travel well and move from a concert to a conference.

We worked with

Which LED screens for an event?

Artixium designs LED displays for concerts, festivals, conferences, product launches and temporary stages, and supports event agencies and audiovisual providers. LED display systems designed for fast deployment, high visual impact and reliable performance across temporary event environments.

Live Touring

Tour-ready LED configurations designed for repeated assembly, transport constraints and consistent show quality from venue to venue.

A touring set is built and struck dozens of times a season, often overnight, by a different local crew in each city. That makes the cabinet’s locking and handling matter more than its pixel pitch: how fast two panels align in the dark, whether a curve locks at a repeatable angle, and what a full flightcase weighs once the trucking plan is fixed.

Our Beryl and Ayrgon 2 touring cabinets are designed around that cycle: tool-free latches, integrated curve locks and a spare-part logic that lets a crew swap a module between soundcheck and doors instead of pulling the wall down.

Stromae concert in front of an LED wall

Stage Floors

Walkable LED surfaces that turn the stage floor into part of the scenography, for immersive shows, brand activations and live performance.

A floor carries the entire show: performers, risers, sometimes a vehicle. Load rating, surface grip and a non-reflective top layer decide whether it works at all; resolution only becomes a question once the panel survives the weight.

The Opal is built for exactly that: an interactive LED floor with a walkable anti-slip surface and a structure rated for live performance, so the stage surface becomes part of the scenography rather than a prop the crew has to protect.

LED floor in the Circus Knie ring

Transparent Setups

See-through panels that keep sightlines open, for scenography, concerts and brand events where the space behind the screen still has to read.

Transparent LED earns its place when the audience has to see through the screen: a set piece that keeps sightlines to the band, a window that stays a window, a booth that does not become a wall. The trade-off never changes: the more open the mesh, the coarser the pitch and the lower the peak brightness.

The Orion 2 sits at the rental end of that range, light enough to fly from truss and open enough to keep a stage visible behind it, which is usually what settles it once the sightlines are drawn.

Polo & Pan concert in front of LED walls

Trade Show Booths

Stand walls, headers and hanging features built to stop people in the aisle and make a product story visible across a crowded hall.

Stand LED runs against a hard deadline: the hall opens at a fixed hour and the build slot is counted in hours, not days. Rigging points, available power and the hall’s own ceiling height usually constrain the design more than the creative brief does.

Which cabinet suits depends on the stand it hangs on. The Manganite mounts into Aluvision and beMatrix frames, so the screen becomes part of the stand structure rather than an object bolted onto it. Where the design curves (a wave, a cylinder, a concave header), the Boron 2 takes the shape instead. Both are bought by the stand builders and AV providers who serve exhibitors show after show, which is why they are engineered for repeated assembly rather than a single build.

LED display on a trade show stand

Mobile LED Trailers

A screen that arrives on wheels: road-legal trailers that deploy on site, for outdoor events, temporary venues and campaigns with nothing to hang from.

A trailer screen is a road vehicle first and a display second. It has to arrive road-legal, deploy on uneven ground, hold its angle in wind, and stay readable in full daylight from the far side of a field or a car park.

These builds use IP-rated outdoor cabinets on a hydraulic frame: high-brightness and front-serviceable, so a fault is cleared at the roadside rather than back at the depot. Since no two chassis are alike, the screen is drawn around the trailer as a custom project.

Trailer-mounted outdoor LED display

Custom Projects

When no standard format fits: shapes drawn with agencies, scenographers and technical providers, then engineered and built.

The event builds people remember are rarely catalogue shapes: a cylinder around a DJ booth, a ceiling that follows a curved roof, a logo cut out of a wall. We build those shapes (curves, volumes, cut-outs, outward angles), because the cabinets are ours and the frame is drawn with the project.

We take those from a scenographer’s drawing to a hanging structure: cabinet layout, frame design, weight and power calculation, then manufacture. Custom LED projects covers the engineering, and the installation team takes it to site.

Custom event LED screen on a show stage
Where it goes

We build LED for every kind of event

Artixium manufactures LED displays for touring productions, open-air festivals, corporate stages and exhibition stands. One factory behind all four, and four schedules that have almost nothing in common.

Concerts & Live Shows

Rigged overnight, filmed from the pit, struck before dawn: the cabinet is chosen for that cycle.

Outdoor Events

Sun, wind and rain in the same afternoon. Brightness and IP rating decide it, not resolution.

Set-up time

Build time weighs as much as image quality when we choose a cabinet. A wall that goes up in four hours and comes down the same night needs fast latches and flightcases; a wall that stays up for a week can be heavier and slower to assemble.

Suited to every venue

Our range covers every venue. An arena offers rigging points and controlled light; an open field brings wind, rain and direct sun. We have the right cabinet for both, without changing what the audience sees on screen.

Corporate Events

Keynote viewing distances are short and the content is text: pitch matters more than sheer size.

For those who deploy

And we build for whoever deploys it. Our clients are rental companies, AV providers, integrators and stand builders: the panels are specified so their crews build fast, service in the field, and keep a fleet earning across a season. The four below show what each case asks of the hardware.

Trade Shows & Exhibitions

A fixed opening hour, a small crew, and a stand that has to travel to the next show intact.

Expert advice

Need advice ?

We are here to help with all your questions!
Case studies

Our event LED screen projects

Custom event solutions

Designed for you, with you

From the first creative brief to the final deployment, Artixium helps event teams configure LED solutions that fit the venue, the schedule and the technical reality of each production.

Understand your event constraints

We review the format, venue access, rigging points, viewing distance and content requirements to recommend a LED setup that matches the real conditions of your event.

Cabinet format, pixel pitch, brightness, curve, transparency, floor integration or maintenance access can be adjusted to support the visual concept and installation constraints.

Build rental-ready systems

Our event-oriented products are selected for fast assembly, repeated handling, transport protection and reliable performance across temporary installations.

Artixium provides technical guidance, deployment planning, spare parts follow-up and maintenance support so your team can deliver with confidence.

Recommended products

Our event LED screen products

Contact

Tell us about your event

Dates, venue and surface: send the basics and a specialist replies with a first technical read, not a brochure.

Frequently asked questions

For most events we recommend the Beryl: a screen that goes up fast, travels in protective cases and looks great on a concert stage as well as at a corporate evening. Depending on your event (size, distance from the audience, indoor or outdoor, ceiling rigging, dates), we can add an LED floor, a see-through screen or a weatherproof outdoor screen.

Yes. We help you choose the screen, set it up, plan its installation and start-up, then follow its upkeep and spare parts. Your team can focus on the event.

Yes. For rental companies and touring shows, we recommend screens made of blocks that are easy to put up and take down, travel safely and fit together in different sizes.

Timing depends on screen size, stock available, transport, rigging and access to the venue. Give us the date, the place and what you have in mind, and we will suggest a realistic schedule.

Yes, even live. The computer that drives the screen can change what is shown in the middle of the show (a change of programme, a last-minute announcement, a sponsor ad, an interactive moment) without touching the screen itself.

It is a screen built for one specific project instead of a standard size: you choose its size, shape, curve and image sharpness to suit the set. It can wrap around a stage, become a see-through set piece or a floor people walk on.

Yes. These three models lock together the same way and hang from the same points, so they form one screen. You can create a shape no catalogue has by picking the right model for each area.

We are a manufacturer: we sell screens, not a day of rental. The price depends on size, image sharpness and how tough the screen is. A screen that will go on tour and be set up a hundred times is not the same as one installed once. If you need a screen for a single event, tell us your dates and we will put you in touch with a rental company near you. For a first idea of prices, see our LED screen price page.

Every screen ships with spare parts. Because the parts are reached from the front, a block can be swapped in minutes without taking the screen down. That is why we choose this type of screen whenever it is used in front of an audience.

No. Artixium manufactures LED displays and sells them to rental companies, installers and distributors, who use them at events and on tours. If you want to rent a screen, tell us where and when and we will point you to a partner who owns our screens.

Conseil d’expert

On vous rappelle

Laissez-nous votre numéro : un spécialiste Artixium vous rappelle sous un jour ouvré pour faire le point sur votre projet.