Trade show LED display
A trade show LED display makes a stand noticeable from the aisle: it must fit the stand frame, build quickly and serve from one show to the next. Artixium designs LED walls, transparent showcases and mobile LED displays for trade show, fair and exhibition stands.
Which LED displays for a trade show?
Stands that go up in hours, travel well and survive the season.
LED walls for exhibition stands
Modular LED walls that become the centrepiece of any stand, compatible with Aluvision and beMatrix frames.
A stand wall is judged from the aisle, four to eight metres away, in a hall lit brightly and evenly from above. That ambient light is what most stand screens lose to, not resolution. A wall that looked strong in a warehouse test reads flat under hall lighting unless brightness and contrast were specified for it.
Stand walls are built on the Beryl touring range, so the same panels go up in a few hours, come down the same night, and travel to the next show in flightcases instead of being written off with the stand.
Transparent LED screens
See-through LED panels for product showcases and brand displays: the screen disappears, the product does not.
Transparent panels let a stand show product through the screen rather than beside it: a vitrine that plays content, or a header that does not black out the space behind it. The mesh is open, so pitch is coarse and brightness moderate: it suits graphics and motion far better than fine detail or small text.
The Orion 2 is light enough to hang from the stand structure without extra rigging, which is usually what decides it on a show floor.
Curved & custom shapes
Concave, convex and cylindrical LED volumes built to match the stand architecture.
Concave, convex, cylindrical: a curved wall reads as a designed object rather than a screen, which is the whole point on a floor crowded with flat rectangles. The radius is set by the cabinet’s curve lock, and a tighter radius than the range allows means a purpose-built frame.
We take the stand designer’s drawing and return a cabinet layout, a frame and a weight, then manufacture it. Custom LED projects is where these run.
Mobile LED screens
Totems and LED walls on castors: wheeled in, plugged into a wall socket, switched on.
Not every stand needs a wall built into the frame. A welcome message at the edge of the aisle, a price list beside the counter, a stage screen for a partner evening: a mobile screen does the job without a frame, a rigger or a processor.
Pad Link 2 rolls in on its castors, levels on its feet and plays over Wi-Fi or 4G, with no cable back to a control position. One unit is a 500 × 2000 mm totem; several, lined up on their bases, make a landscape wall that rolls from room to room. Three pixel pitches, P1.56 to P2.6. See Pad Link 2
We build LED for every kind of professional event
Artixium equips exhibitor stands, congresses and brand launches: spaces built for a few days, where the image has to be right the moment the doors open.
Exhibitor stand
Built just before opening, seen up close by visitors who are only passing by.
Read from the aisle
We specify from the reading distance in the aisle and the depth of the stand: pixel pitch follows the first, the cabinet adapts to the second.
Medical and scientific congress
An audience reading fine data: sharpness matters more than spectacle.
With your stand builder
We work with your stand builder: integration into Aluvision and beMatrix frames, front maintenance, and power requirements sent before the show.
Brand launch
A presentation where the screen has to step back behind the product.
Ready to plug in
For a one-off presence, the mobile LED screen arrives ready to plug in.
Fitting an LED wall into a stand frame
Before any creative choice, four constraints decide the screen: the frame that carries it, the distance it is read from, the access left for maintenance, and the power sold with the space.
Aluvision and beMatrix frames
The Manganite cabinet measures 496 × 496 mm, a size that fits the grid of Aluvision and beMatrix frames. The screen becomes part of the stand rather than sitting in front of it.
Pixel pitch follows distance
Recommended viewing distance: one metre per millimetre of pixel pitch. Seen from the aisle, there is nothing to gain below P1.9. Range: P1.2 to P2.5 indoors, up to P3.8 outdoors.
Front maintenance
Back and front access: Manganite is serviced from the front as well as the back. A tile is changed from the aisle, with no corridor to keep clear behind the screen.
Order the power ahead
For a 3 × 2 m wall: about 240 W/m² in normal use and 600 W/m² at peak. The peak figure is the one to declare to the organiser.
Need advice ?
Stands fitted with our LED screens
Why choose Artixium for a trade show LED display?
We manufacture the LED screens on your stand and stay reachable during build-up, when the hall clock is running.
We make the cabinets ourselves
We have designed and built our own LED cabinets for more than twelve years. The quote covers hardware, not a day rate, and an unusual shape is handled in manufacturing rather than improvised on site.
Cabinets in stock in Europe
A thousand square metres of stock in France and across Europe. A replacement cabinet leaves from there, not from a container on the other side of the world, which is what counts when the show runs three days.
Repaired in France, warranted up to five years
After-sales service is handled in France and the warranty runs up to five years. A kit that works a full season eventually needs a repair, and it happens here rather than going back to a factory abroad.
We say when renting beats buying
We sell the hardware. If you exhibit once or twice a year, renting from a provider in our network usually costs less. We say so, and we make the introduction.
Which LED screen for your stand?
Visit our showroom
- Plan your visit
Configure your LED screen
- Configure my screen
Frequently asked questions
How long does a stand build take?
Hours rather than days. Pre-rigged structures, tool-less assembly and clear cable management are what make a full LED stand buildable inside a normal build-up window at a trade fair.
Does it fit our existing stand frames?
Yes. The cabinets integrate with Aluvision, beMatrix and other standard exhibition frames, so there is no structural rework for your builder.
Is the kit safe to transport between shows?
Custom flight cases protect the cabinets through every truck, warehouse and re-rig, which is what keeps a rental fleet viable across a season.
Should we buy panels or go through a rental partner?
It depends how often you exhibit, and Artixium does not rent: we manufacture and sell through installers, distributors and AV providers. A regular show calendar usually justifies owning a modular set outright. For a one-off activation, a partner from our network will supply and crew the stand from their own fleet. We can introduce you either way.
How much does an LED wall for a stand cost?
We quote hardware rather than day rates, because we are a manufacturer. Price follows surface area, pixel pitch and cabinet class. If you exhibit several times a year, owning a modular set usually beats hiring repeatedly once transport and storage are counted; below that, hiring from a partner in our network is the cheaper route and we will make the introduction.
Can the same panels be used at different stand sizes?
Yes: that is the point of a cabinet system. The same panels build a 3×2 wall at one show and a 5×3 at the next. We size the initial order so your common configurations work without buying awkward quantities.
Who handles the rigging certification?
We supply the load calculations and structural figures the organiser asks for. The hang itself is carried out by the hall’s approved rigger or by the crew building your stand, depending on the venue’s rules.
Do you install on site?
No. We are a manufacturer: we do not provide event services or rental. The build is done by your stand builder, your AV provider or an integrator from our network, and we can make the introduction. On our side we ship the hardware with the cabinet layout, the saved configuration and the build documentation, and we stay reachable while the stand goes up.
Tell us about your stand
Show dates, stand size and your build slot. We come back with a configuration and a schedule.