Indoor LED display

An indoor LED display is viewed up close: it needs a fine pixel pitch, comfortable brightness and a seamless image. The Artixium range runs from fine pitch to MicroLED, for lobbies, retail, control rooms and meeting rooms.

Our indoor LED display models

Lobbies, retail, meeting or control rooms: an indoor LED display is chosen first by viewing distance. From fine pitch for close reading to transparent or flexible formats, compare our ranges and we will refine the configuration together.
Titanite Access, indoor LED display

Titanite Access

P1.25 – P1.56 – P1.88
Indoor · MicroLED / Ultra fine pitch
Titanite 3, indoor LED display

Titanite 3

P0.6 – P0.7 – P0.9 – P1.2 – P1.5
Indoor · MicroLED / Ultra fine pitch
Qwartz Swift, indoor LED display

Qwartz Swift

P1.56 – P1.95 – P2.6 – P2.98 – P3.13 – P3.91
Indoor · Back Maintenance
Qwartz Duo, indoor LED display

Qwartz Duo

P1.5 – P1.9 – P2.6 – P3.9
Indoor · Fine pitch
Qwartz 3, indoor LED display

Qwartz 3

P1.5 – P1.9 – P2.6
Indoor · Fine pitch
Neon, indoor LED display

Neon

P3.9a7.8 – P5.2a10.4 – P7.8 – P10.4
Indoor · Transparent
Mica, indoor LED display

Mica

P1.5 – P1.88 – P2 – P2.5 – P3 – P4 – P5
Indoor · Creative & flexible
Granite, indoor LED display

Granite

P1.9 – P2.6 – P2.9 – P3.9
Indoor · Fine pitch
Calcite 2, indoor LED display

Calcite 2

P2.5 – P3.9 – P6.2
Indoor · Transparent
Cadmium, indoor LED display

Cadmium

P0.6 – P1 – P1.2 – P1.3
Indoor · MicroLED / Ultra fine pitch

How to choose an indoor LED display?

An indoor display is chosen according to how close the audience stands, the room lighting, the image quality expected and the wall space available.

Pixel pitch for the viewing distance

The closer the audience, the finer the pitch: the minimum viewing distance in metres roughly equals the pixel pitch in millimetres. A lobby viewed from 2 m calls for a pitch around 2 mm; a control room viewed up close, fine pitch or MicroLED.

Brightness for the lighting

An indoor display does not need outdoor power: adjustable brightness and high contrast keep it readable under room lighting without tiring the eyes.

A seamless image

For a continuous picture, LED tiles form a single screen with no bezels or joint lines, whatever its size.

Front maintenance

If the display is mounted flat against a wall, choose a front-serviceable model: modules come out from the front, with no service space needed behind.

Tell us about your indoor project

Space, surface, viewing distance and use: give us the essentials and we will come back to you within 24 hours with a first recommendation.

Indoor LED display FAQ

An indoor LED display is a screen where every pixel produces its own light, with no backlight. It is built for indoor use, with a fine pixel pitch and comfortable brightness for viewing up close: lobbies, retail spaces, control rooms and meeting rooms. The finest models use MicroLED technology.

Indoor displays usually use a fine pixel pitch (roughly P0.9 to P2.5) because people view them up close. The right choice depends on how close viewers stand. Our team recommends it for your space.

An LED wall has no bezels or seams, so the image is continuous. It is also brighter and lasts longer than a wall of tiled LCD screens. It is the right choice for a quality indoor display that runs all day.

Yes. Standardised cabinets assemble into flat, curved or custom shapes and ratios, so the display fits the exact architecture of the space.

Modules come out from the front, so servicing stays simple even when the display is mounted flush to a wall. Installation is clean and maintenance is fast.

With proper maintenance, a complete LED display typically lasts 10 to 15 years, and the LEDs themselves around 100,000 hours. Our indoor displays are made for permanent installations that run all day. They come with up to a 5-year warranty and after-sales support in France.

Expert advice

We’ll call you back

Leave us your number: an Artixium specialist will call you back within one business day to discuss your project.