Helium 2 rental LED screen for seamless 90° corners
The Helium 2 rental LED screen is made for cubes and 90° corners. It comes in pixel pitches from P1.9 to P3.9, can be serviced from the front or the rear, and takes flat or 45° connectors. It is compatible with Beryl and Boron 2, so cabinets can be mixed in the same installation.
Helium 2
Creative Freedom for Touring Installations
Helium 2 rental LED screen for cubes and seamless 90° corners. Each side of the cabinet adapts through an add-on system, and compatibility with Beryl and Boron 2 makes it easy to grow an existing PRO TOURING fleet.
Features
Four-Side Add-Ons
The Helium 2 rental LED screen has an innovative add-on system installed around all four sides of the cabinet frame. Each side can receive either a flat component or a 45-degree add-on, allowing the cabinet to form flat edges or precise right-angle transitions. Each add-on can also be flipped, so technicians can set up each side of the cabinet in the orientation needed. This highly modular construction makes the Helium 2 particularly suitable for cubic LED displays, 90-degree corners and customized three-dimensional structures, while keeping the same central cabinet architecture throughout the
Cross-Compatibility
The Helium 2 rental LED screen is compatible with the Beryl and Boron 2 touring cabinets, so it can extend an existing Artixium PRO TOURING stock. It can connect side-to-side with the Boron 2, while the Beryl supports integration with the Helium 2 both side-to-side and top-to-bottom. These connection options let you combine different cabinet families in one LED display. Rental operators can therefore introduce cubic sections or 90-degree transitions into an existing touring system without creating a completely separate cabinet fleet for these specialized applications.
MiniLED 4-in-1
The P1.9 and P2.6 versions of the Helium 2 use MiniLED 4-in-1 technology, which encapsulates four smaller LEDs within the footprint of one conventional SMD LED package. More light points in the same area means sharper images and richer colours for indoor screens viewed up close. The encapsulated construction also increases resistance to physical stress, an important advantage for equipment exposed to repeated transportation and handling. Despite this additional protection, individual MiniLED components can still be repaired, supporting localized servicing and prolonged operational efficiency.
Front and Rear Maintenance
The Helium 2 rental LED screen provides maintenance access from both the front and rear of the cabinet, allowing technicians to select the most practical servicing direction for each installation. Its magnetic LED modules simplify individual module removal, while the toolless power box provides direct access to the cabinet’s central electronic section without requiring a conventional tool-based dismantling process. This dual-access maintenance architecture helps reduce intervention time and limits operational downtime. It is particularly valuable during touring events, where technical servicing may need to be completed quickly between rehearsals, performances or successive installation stages.
Hanging and Stacking System
The Helium 2 is fully compatible with the Beryl hanging-bar and stacking system, allowing it to use an established installation infrastructure from the Artixium touring range. This compatibility supports suspended configurations as well as installations assembled from the floor, depending on the available structure and project requirements. Integrating the cabinet into the same hanging and stacking ecosystem simplifies the deployment of mixed Helium 2 and Beryl installations. Touring operators can therefore expand their creative configurations while continuing to use compatible structural equipment already intended for repeated assembly, dismantling and transportation.
Toolless Locking System
Built-in tool-free locks connect neighbouring Helium 2 cabinets without separate tools. This mechanism supports the repeated installation and dismantling cycles associated with rental LED equipment, where the speed and consistency of each cabinet connection directly affect the complete setup workflow. By incorporating the locking hardware into the cabinet structure, the system also reduces the number of loose components that technicians must manage on site. The toolless design therefore provides a practical and repeatable assembly method for cubic displays and mixed PRO TOURING configurations.
Ergonomic Handles
The cabinet has ergonomic handles that make lifting, positioning and handling easier on tour. These integrated handles give technicians dedicated gripping areas when cabinets are unloaded, aligned or removed from an installation. Because they form part of the cabinet structure, the handles remain immediately available throughout repeated deployment cycles without requiring separate handling accessories. This feature supports a more controlled on-site workflow when the Helium 2 cabinets must be positioned within cubic constructions, right-angle displays or combined installations using other compatible PRO TOURING products.













